VIZIO P42HDTV10A Guia Do Utilizador
VIZIO P42 HDTV User Manual
Version 6/14/2006
16
www.VIZIOCE.com
Chapter 2
Connecting Equipment
2.1
Which Video Connection Should I Use?
The VIZIO P42HDTV has six different ways to connect your video equipment from a basic connection to
the most advanced for digital displays.
the most advanced for digital displays.
Connection
Quality (type)
Connector
Rear
Panel
Color
Color
Codes
Description
Best
(digital)
Black
HDMI (High-Definition Multimedia Interface) - It is
the first and only industry-supported, uncompressed,
all-digital audio/video interface. HDMI provides an
interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and an
audio and/or video monitor, such as a digital
television (DTV), over a single cable.
the first and only industry-supported, uncompressed,
all-digital audio/video interface. HDMI provides an
interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and an
audio and/or video monitor, such as a digital
television (DTV), over a single cable.
Best
(digital)
Black
DTV Coaxial RF. When used for MPEG2 encoded
bit streams from ATSC broadcast programming, this
input takes advantage of the High Definition content.
bit streams from ATSC broadcast programming, this
input takes advantage of the High Definition content.
Best
(analog)
Purple
RGB PC (VGA) – This video input has separate red,
green and blue color components. The signal
carries horizontal and vertical sync information on
the green signal. This is most commonly used for
PC input.
green and blue color components. The signal
carries horizontal and vertical sync information on
the green signal. This is most commonly used for
PC input.
Better
(analog)
Green
and Blue
Component 1/2 - The video signal is separated into
three signals, one containing the black-and-white
information and the other two containing the color
information. This enhancement over S-Video takes
advantage of the superior picture provided by
progressive scan DVD players and HDTV formats.
three signals, one containing the black-and-white
information and the other two containing the color
information. This enhancement over S-Video takes
advantage of the superior picture provided by
progressive scan DVD players and HDTV formats.
Good
(analog)
Red
S-Video (AV3) - The video signal is separated into
two signals, one containing the black-and-white
information and the other containing the color
information. Separating the color in this way avoids
‘cross color’ effects where closely spaced black and
white lines are erroneously displayed in color. It also
enables text to be displayed more sharply.
two signals, one containing the black-and-white
information and the other containing the color
information. Separating the color in this way avoids
‘cross color’ effects where closely spaced black and
white lines are erroneously displayed in color. It also
enables text to be displayed more sharply.
Good
(analog)
Yellow,
Orange &
Brown
AV1/AV2/AV3 (Composite) - The complete video
signal is carried through this single pin connector.
This is the most commonly used video connection.
signal is carried through this single pin connector.
This is the most commonly used video connection.
Good
(analog)
Black
TV Coaxial RF. This is the connection for standard
NTSC TV using antenna or cable. If you have a
VCR, you can connect your antenna/cable to the
VCR RF Input and connect the VCR RF Output to
this connector.
NTSC TV using antenna or cable. If you have a
VCR, you can connect your antenna/cable to the
VCR RF Input and connect the VCR RF Output to
this connector.
Note: For more info refer to the Quick Start Guide