VIZIO vu42lf Manual Do Utilizador

VIZIO VU42L FHDTV10A User Manual 

Version 12/17/2007 

31 

 

www.VIZIO.com 

 

For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6. 

 

1. 

Connecting the Power Cable 
Connect the power cord to the power cord connector on the back of the LCD HDTV, and then 
plug the power cord into an AC wall socket. 

2. 

Connect Audio and Video Cables to the LCD HDTV 
(see pages 16 ~ 29 for detailed steps) 

3. 

Turning Power On 
Once all the components are connected, press the Power ON button on 
the side of the LCD HDTV, or press the Power ON (Red) button on the 
remote control. 

4. 

Select Input Source 
Select the Input Source for the LCD HDTV by pressing the INPUT button 
on the side of the TV or using the Input button on the remote control.  
Pressing this button will cycle you through the following options: TV, AV1, 
AV2, Component 1, Component 2, RGB, HDMI 1 and HDMI 2. 

5. 

Using DTV and TV with an Antenna or Cable 
If an antenna or cable source is connected to the DTV/TV input, you will need to select TV using 
the INPUT button on the remote control or the side of the LCD HDTV, or directly by pressing the 
TV button on the remote control, and Auto Scan for the available TV channels. 

 

 

 

 

       

       

 

 

       

a.  The screen will show ‘snow’ and the first Initial 

Setup OSD panel. 
 
Press the OK button on the remote control. 

 

 

 

 

 

 

 

 

 

Note: If you do not see this option within the OSD, you might 
have selected the wrong input in the previous steps and you will 
need to repeat step 4 (above) to select the correct input source.