VIZIO VW42L Guia Do Utilizador

VIZIO VW42L HDTV10A User Manual 

Version 6/19/2007 

8 

 

www.VIZIO.com 

Power ‘VIZIO’ light – The VIZIO name lights white when 
powered on and orange when powered off. 

 
Remote Control Sensor – This is the window through which all 
of the remote control signals pass to the sensor.  Point the 
remote control directly at this window for the best response to 
the remote signal. 

 

 ) – Switch the VW42L on by pressing the 

button once.  Press the button again to the VW42L off.  
Menu – This button activates the On Screen Display (OSD).  
If a sub-menu is active, pressing this button will return to 
the previous menu level. 
Channel ▲/▼ – Use these buttons to step up or down the 
TV channels.  While the OSD is active, these buttons 
function as up and down controls in the OSD menus. 
Volume ◄/► – Use these buttons to increase or decrease 
to the speaker volume.  While the OSD is active, these 
buttons function as left and right controls in the OSD menus.  
Input (Enter) – Repeated pressing of this buttons steps 
through the input sources in the following sequence: TV, 
AV1 (S-Video or Video), AV2, Component 1, Component 2, 
HDMI 1, HDMI 2, and RGB. Once you have stepped 
through the entire sequence, you will return to the 
beginning. 

Additionally, when the OSD is active, this button confirms 
the menu function to be adjusted.  When the OSD is not 
active, pressing this button will display the current input 
mode. 

 

1. 

AV1 In – Connect the primary source for composite video devices, 
such as a VCR or video game.  Use the white and red connectors to 
connect the external audio from the same source.  The S-Video, if 
connected, will take priority over AV1 RCA connector.