Bosch 1006vsr 3 Guia Do Utilizador
11
Figure 9
Lubrication
Refer to Figure 10:
The following areas should be kept lubricated:
Upper wheel bracket (A)
Lower wheel bracket (B)
Jack screw (C)
Upper wheel axle (D)
Cams (E)
Pivot points (F)
Upper and Lower Wheel Brackets
Periodically lower the upper wheel bracket, and
apply a light coating of lithium grease to the post
(A).
apply a light coating of lithium grease to the post
(A).
Apply a light coating of oil, such as SAE 30W, to
the lower wheel bracket (B).
the lower wheel bracket (B).
Jack Screw
Apply lithium grease as needed to the screw
threads (C).
threads (C).
Cams
Apply a coating of lithium grease to the cams (E)
where they contact the bottom of the lower
wheel bracket.
where they contact the bottom of the lower
wheel bracket.
Pivot Points
Apply a small amount of oil, such as SAE 30W,
to the pivot points (F).
to the pivot points (F).
Wheels
When upper or lower wheels are not being used,
or are stored away, apply a light coat of oil to
prevent rust. Wipe off the oil before using the
wheels.
or are stored away, apply a light coat of oil to
prevent rust. Wipe off the oil before using the
wheels.
Figure 10