VIZIO XVT3D650SV Guia Do Utilizador

9

The first time you turn on the TV, the Setup App will guide you through each of the 
steps necessary to get your TV ready for use.

Before you begin the first-time setup:

•  Your TV should be installed and the power cord should be connected

to an electrical outlet. See

•  Your devices should be connected. See

page 5.

•  If you have a wireless network, have the network key ready.
•  If you are connecting to your network with an ethernet cable, connect

it to the ethernet port on the TV. See

To complete the first-time setup:

1.  Press the 

Power/Standby button on 

the remote. The TV powers on and the 
Setup App starts. 
 
 
 
 
 

2.  Use the 

Up/Down Arrow buttons on 

the remote to highlight 

Setup and press OK. 
 
 
 
 
 

3.  Activate the remote by pressing 

Record and the Green VIA Shortcut 
button for 

5 seconds, then highlight 

Begin Activation and press OK. 
 
Wait for the remote to be found. 
 

4.  When the remote is found, use the 

Arrow Up/Down buttons on the 
remote to highlight 

Internet and press OK.  
 
 
 

5.  Use the 

OK and Arrow Up/Down 

buttons on the remote to read and 
accept the Terms of Service and 
Privacy Policy for Yahoo! TV Widgets.  
 
When you are finished, highlight 

Next 

and press 

OK. 

6.  Select the name of your wireless 

network from the list of available 
networks and press 

OK. 

 
Enter the network key using the 
QUERTY Keypad on the remote, then 
highlight 

Connect and press OK.

 

If the TV is connected to your network via an ethernet cable, you will 
not see this screen.

If you are not connecting your TV to your network, you can skip this 
step. Highlight 

Skip and press OK.

7.  Enter your First Name, Last Name, 

Phone Number, ZIP Code, and E-mail 
Address using the QUERTY Keypad on 
the remote. 
 
Highlight 

Next and press OK. 

 

Completing the First-Time Setup