VIZIO XVT3D650SV Guia Do Utilizador
5
19
XVT3D650SV
Resetting the Audio Settings
To reset the audio settings to the factory default settings:
To reset the audio settings to the factory default settings:
1. Press the
MENU button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons on the remote to highlight the TV Settings icon and
press
OK. The TV Settings menu is displayed.
3. Use the
Arrow buttons on the remote to highlight Audio and press OK. The
Audio Settings menu is displayed.
4. Use the
Arrow buttons to highlight Reset Audio Mode and press OK. The
TV displays, “Are you sure you want to RESET Audio Settings to the factory
defaults?”
defaults?”
5. Highlight
Yes and press OK.
6. Press the
EXIT button on the remote.
Adjusting the Tuner Settings
The Tuner Settings Menu can be used to perform channel scans or make
adjustments when the TV is receiving channels from an antenna, cable, or satellite.
adjustments when the TV is receiving channels from an antenna, cable, or satellite.
Setting the Tuner Mode
If you are using a device that is connected to the RF input, such as an external
antenna or cable TV connection, you must set the tuner mode.
If you are using a device that is connected to the RF input, such as an external
antenna or cable TV connection, you must set the tuner mode.
To set the tuner mode:
1. Press the
MENU button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons on the remote to highlight the TV Settings icon and
press
OK. The TV Settings menu is displayed.
3. Use the
Arrow buttons on the remote to highlight Tuner Settings and
press
OK. The Tuner Settings menu is displayed.
4. Highlight
Tuner Mode and press OK. The Tuner Mode menu is displayed.
5. Highlight
Antenna or Cable and press OK.
6. Press the
EXIT button on the remote.
Scanning for Channels
Before the TV can detect and display channels and their associated information,
you must scan for channels. A channel scan may also be necessary when the
TV has been moved to an area where different free-to-air broadcast television
channels are available.
Before the TV can detect and display channels and their associated information,
you must scan for channels. A channel scan may also be necessary when the
TV has been moved to an area where different free-to-air broadcast television
channels are available.
1. From the Tuner Settings menu, highlight
Auto Channel Scan. The auto
channel scan begins.
2. Wait until the channel scan is 100% complete. Highlight
Done and press
OK.
3. Press the
EXIT button on the remote.
Adding New Channels
Occasionally, you may need to add a new analog channel or add a new range of
channels. You can do this by using the Partial Channel Search and Add Analog
Channel options.
Occasionally, you may need to add a new analog channel or add a new range of
channels. You can do this by using the Partial Channel Search and Add Analog
Channel options.
To add a range of new channels:
1. From the
Tuner Settings menu,
highlight
Partial Channel Search.
The Partial Channel Search menu is
displayed.
displayed.
2. Highlight
Scan Mode and select
the type of channel you are adding:
Analog, Digital, or Analog/Digital.
Analog, Digital, or Analog/Digital.
3. Highlight
From Channel and enter the
channel from which you want to begin
the scan. (Use the
the scan. (Use the
Number Pad on the
remote to enter the channel.)
4. Highlight
To Channel and enter the
channel to which you want to end the
scan. (Use the
scan. (Use the
Number Pad on the
remote to enter the channel.)
5. Highlight
Start and press OK. The
partial channel search begins.
6. Wait until the partial channel search is 100% complete. Highlight
Done and
press
OK.
7. Press the
EXIT button on the remote.