Voxson gps400 Guia Do Utilizador

 

4.  Before attaching the GPS400 device into the cradle, ensure that 

the battery switch on the back of the unit is turned on.    Slide 

the GPS400 into the cradle from the top.    With the device in 
place, twist the gooseneck to adjust the position of the GPS400 

so that you can see the screen comfortably. 

 

 

 

 

 

5.  Connect the supplied car charger cable to the USB / Charger connector on right side of the GPS400 

and plug the other end of the cable into the cigarette lighter socket in the car.    Use the power 

button on the top of the GPS400 to turn the device on. 

 

The first time you turn on your navigation device it may take up to 10 or 15 minutes to acquire reliable 
GPS signal.    Obstacles such as car ports, bridges, tunnels, and buildings will affect the navigation device’s 

ability to obtain an accurate signal.    Do not be alarmed if the map displays your current location in 

another city when you first turn the unit on, your position will be automatically updated once reliable GPS 

signal is acquired.    It is best to move your vehicle to a clear and open area free from obstacles that may 
hinder the GPS performance, and then remain stationary until the GPS has acquired your current position.   

If the vehicle is moving whilst the GPS is trying to acquire a signal, the acquisition time may be 

significantly increased. 

 

Your Voxson GPS400 is now ready for use! Please read the instructions regarding navigation software to 
learn more about using your GPS. 

 

CAUTION: Do not leave the device mounted in your car when parked. Exposure to extreme heat may 

cause damage.    Simply disconnect the charger and remove the device from the cradle.    You may 

choose to leave the mounting system in place on the windscreen for easy installation when you 
return to your vehicle.    Removing the device from view will also reduce the risk of theft. 

GPS400 User Manual