Alesis qs6.1 Guia De Referência

Appendix B Ñ MIDI Supplement

QS6.1 Reference Manual

171

There are three MIDI registered parameter numbers (RPNs) which the QS6.1 will
recognize in Mix Play Mode when General MIDI Mode is enabled. These are:

¥

 (Pitch Bend Sensitivity): This will directly affect

the Pitch Wheel Range parameter of all four Sounds of the Program on the
received MIDI Channel of the Mix. If the Channel which received the RPN is
selected using the 

[

▲

 PAGE]

 and

 [PAGE

▲

]

 buttons, the word ÒEDITEDÓ will

appear next to the word ÒMIXPROGÓ in the lower part of the display. However,
if you are viewing the Pitch Wheel Range parameter in the display (Mix Program
Edit Mode, Pitch Function, Page 4) when the RPN arrives, the display will not be
updated to reflect the new setting. But if you go to another Page or Function and
then return, the display will reflect the updated setting.

¥

 (Fine Tune): This will directly effect the Pitch

Detune parameter of all four Sounds of the Program on the received MIDI
Channel of the Mix. Also, when this RPN is received, the QS6.1 will
automatically make sure that all four Sounds of the Program have their Detune
Type parameter set to ÒNormalÓ (Program Edit Mode, Pitch Function, Page 3). If
the Channel which received the RPN is selected using the

 [

▲

 PAGE]

 and

[PAGE

▲

]

 buttons, the word ÒEDITEDÓ will appear next to the word

ÒMIXPROGÓ in the lower part of the display. However, if you are viewing the
Detune Amount parameter in the display (Program Edit Mode, Pitch Function,
Page 2) when the RPN arrives, the display will not be updated to reflect the new
setting. But if you go to another Page or Function and then return, the display
will reflect the updated setting.

¥

 (Coarse Tune):This will directly effect the Pitch

Semitone parameter of all four Sounds of the Program on the received MIDI
Channel of the Mix. If the Channel which received the RPN is selected using the
[

▲

 PAGE

] and [PAGE

▲

] buttons, the word ÒEDITEDÓ will appear next to the

word ÒMIXPROGÓ in the lower part of the display. However, if you are viewing
the Tune Semitone parameter in the display (Program Edit Mode, Pitch Function,
Page 1) when the RPN arrives, the display will not be updated to reflect the new
setting. But if you go to another Page or Function and then return, the display
will reflect the new setting.

(Portions of this appendix are abridged versions of material from  Power Sequencing
with Master Tracks Pro/Pro 4 and The Complete Guide to the Alesis HR-16 and MMT-8 ,
copyright 1990 and 1989 respectively by AMSCO Publications, and are adapted with
permission.)