Alesis qs6.1 Guia De Referência

Part 6: Editing Effects

80

QS6.1 Reference Manual

Note: If you want to know how to control the speed of the Lezlie from the Mod
Wheel or some other controller, learn about the Effects Mod function (button [60]).
Also, see the note at the top of the Lezlie section regarding controlling Lezlie speed in
the various Configurations.

This parameter provides a way to cut or boost the high frequencies in the Lezlie
effect, allowing you to ÒdarkenÓ or ÒbrightenÓ the tone to suit your music. It works
in 1dB increments, over a 12 dB range.

In Configuration #5, as noted, the Lezlie has two possible input sources. This is one
of them. It is limited to one of two settings: Reverb Output or Delay Output.

This parameter selects the second input to the Lezlie in Configuration #5. It has a
wider selection of possible settings than Input 1. They are:

·  Sends 1 Ð 4

·  Overdrive Output

·  Pitch Input

·  Pitch Output

·  Delay Input

·  Reverb Input

This controls the relative level of Input 1 and Input 2 signals going into the Lezlie.

When set to Ò

<99Ó, only Input 1 is being routed to the Lezlie. When set to Ò99>Ó,

all that goes through is Input 2 . When set dead-center to Ò

<0>Ó, an even mix of both

signals is passed on.