DataCard 285 Guia Do Utilizador

Página de 159
Getting started
2-7
User’s Guide for the Magna™ Class Printer
User’s Guide
Printer driver
Supplies kit if one was ordered with this printer
Figure 2-4: Place the card output stacker on the printer
9
Place the card output stacker on the right end of the printer 
(
Figure 2-4
). The card output stacker hooks into the printer. 
10 Make sure the card cartridge is securely seated in the printer. If 
needed, move it gently to seat it. 
11 Remove the printhead packing tape.
a
Lift the top cover and then move the support down so it rests 
on the internal frame, as shown in 
MagnaUserGuide.book  Page 7  Friday, May 5, 2000  1:09 PM