Konica Minolta DiMAGE Xi Manual De Instruções
45
LCD brightness
The brightness of the LCD monitor can be set in eleven levels. After
selecting the LCD brightness option and pressing the enter button on
the menu (p. 28, 58), the LCD brightness screen will be displayed.
Pressing and holding the display button will also active the LCD bright-
ness screen.
selecting the LCD brightness option and pressing the enter button on
the menu (p. 28, 58), the LCD brightness screen will be displayed.
Pressing and holding the display button will also active the LCD bright-
ness screen.
Use the left and right keys (1) to adjust the brightness level; the monitor
image will change accordingly. To set the level, press the enter button
(2); the camera will return to the recording or playback mode. The LCD
brightness level will affect both modes.
image will change accordingly. To set the level, press the enter button
(2); the camera will return to the recording or playback mode. The LCD
brightness level will affect both modes.
Auto-power-off menu settings
To conserve battery power, the camera will shut down if an operation is not made within a certain
period. To restore power, press the main switch. The length of the auto-power-off period can be
changed in the setup 1 section of the recording and playback-mode menu (p. 28, 58): 1, 3, 5, 10, and
30 minutes. The length of the auto-power-off period is fixed at 10 minutes when the camera is con-
nected to a computer.
period. To restore power, press the main switch. The length of the auto-power-off period can be
changed in the setup 1 section of the recording and playback-mode menu (p. 28, 58): 1, 3, 5, 10, and
30 minutes. The length of the auto-power-off period is fixed at 10 minutes when the camera is con-
nected to a computer.
Audio signals
The camera’s audio signals can be turned off and on in the setup 1 section of the recording and play-
back-mode menu (p. 28, 58). When on, both tone signals and sound effects are used. The sound
effect simulates a film camera when the shutter is released. The sound effects and tones can be
turned off independently of each other.
back-mode menu (p. 28, 58). When on, both tone signals and sound effects are used. The sound
effect simulates a film camera when the shutter is released. The sound effects and tones can be
turned off independently of each other.
Off
SoundFX only
w/o sound FX
On
All audio signals are turned off.
Shutter effect only. No tone signals during operation.
Tone signals only to indicate the camera operations.
Shutter effect and tone signals.
Menu setting
1
2
Low
High
Enter