Bizfon 2000 Guia Do Utilizador
Bizfon Manual II: Administrator's Guide
Appendix: System Default Values
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
103
Parameter
System Default Value
timeout is 30.
Line Settings
(for Bizfon4000)
(for Bizfon4000)
Onboard Lines Configuration:
CallerID- Standard 2 FSK for all lines
Ringer type: Type A for all lines
Busy Tone and Power Disconnect indications: disabled for all lines
Off-hook caller ID - disabled for all lines
Ringer type: Type A for all lines
Busy Tone and Power Disconnect indications: disabled for all lines
Off-hook caller ID - disabled for all lines
IP Lines Configuration:
1-46 IP Lines attached to 31-76 extensions. IP Lines 1-30 enabled, others
disabled.
disabled.
FXS Lines Loopback Settings – Loopback is disabled for all FXS lines, Loopback
timeout is 30.
timeout is 30.
FXO Settings
(for Bizfon2000)
(for Bizfon2000)
1 FXO line – enabled, incoming and outgoing calls allowed, routed to 00 Attendant.
FXO Settings
(for Bizfon4000)
(for Bizfon4000)
2 FXO lines – both enabled, incoming and outgoing calls allowed and routed to 00
Attendant on both.
Attendant on both.
External PSTN Gateways
Use PSTN lines of the other device - disabled,
Authorization Parameters – undefined.
Authorization Parameters – undefined.
Gain Control Settings
FXS lines:
Transmit Gain: - 6
Receive Gain: 0
FXO lines:
Transmit Gain: 0
Receive Gain: 6
Transmit Gain: - 6
Receive Gain: 0
FXO lines:
Transmit Gain: 0
Receive Gain: 6
SIP Trunk Settings
Enable Trunks to Slave Devices – disabled,
Trunks to Slave Devices – no entries,
Enable Trunks to Master Devices – disabled,
Trunks to Master Devices – no entries.
Trunks to Slave Devices – no entries,
Enable Trunks to Master Devices – disabled,
Trunks to Master Devices – no entries.
Call Routing
Route all incoming SIP calls to Call Routing - disabled
Local Routing table – 6 entries defined for PBX, IP, PSTN and emergency calls
establishment as well as for calls to Auto Attendant and Bizfon’s Technical Support.
Local AAA Table - no entries.
Local Routing table – 6 entries defined for PBX, IP, PSTN and emergency calls
establishment as well as for calls to Auto Attendant and Bizfon’s Technical Support.
Local AAA Table - no entries.
RADIUS Settings
RADIUS client – disabled.
Voice Mail Common Settings
Voice Mail Recording - G729a,
Memory Allocation - Embedded Memory Storage (for Bizfon4000 only).
Memory Allocation - Embedded Memory Storage (for Bizfon4000 only).
Dial Timeouts
4 seconds.
IPSec, PPTP and L2TP
No connections.
PPTP Server Configuration
PPTP Server Configuration
Subnet – 172.31.1.0/24,
CHAP, MSCHAP and MSCHAPv2 – enabled,
MPEE – MPEE 128 bit
CHAP, MSCHAP and MSCHAPv2 – enabled,
MPEE – MPEE 128 bit
L2TP Server Configuration
Subnet – 172.31.2.0/24.
Dynamic DNS
Disabled
Firewall
Enabled, Medium level,
Ping Stealth - enabled
Fool Portscanner - disabled
Ping Stealth - enabled
Fool Portscanner - disabled
IDS Enabled.
NAT Enabled.
Filtering Rules
Outgoing Traffic - MS File Sharing
(Blocked for all),
SIP Access (Allowed for all),
No user defined services and IP pool groups
No user defined services and IP pool groups
DNS Server Settings
Time to live (TTL) – 86400 seconds,
Mail Exchange (MX) – undefined,
No aliases defined.
Mail Exchange (MX) – undefined,
No aliases defined.