Bizfon 2000 Guia Da Instalação
Bizfon Manual I: Installation Guide
Appendix: Configuring NAT Traversal
•
Enter the WAN IP address of the router into the Mapped Host text field. Set the
Mapped RTP/RTCP Port Range according to the values specified on the router, in this
case to 6000 (Min) and 6049 (Max), respectively. Click the Save button to save the
contents.
Mapped RTP/RTCP Port Range according to the values specified on the router, in this
case to 6000 (Min) and 6049 (Max), respectively. Click the Save button to save the
contents.
The Bizfon will activate the settings and register the extensions on the Bizfon’s SIP Server
after a few minutes. You can verify the settings from the main Bizfon Management menu
under Status in the SIP Registration Status section.
after a few minutes. You can verify the settings from the main Bizfon Management menu
under Status in the SIP Registration Status section.
Bizfon2000 and Bizfon4000; (SW Version 4.1.x)
41