Alpine cva-1004 Guia Do Utilizador

Color adjustment can be made only to video
sources (DVD, Navigation system, etc). Color
adjustment cannot be made if a Navigation
system with the RGB feature is connected.

After carrying out steps 1 to 3 of "To display the
SETUP screen" (page 29), perform the operation
shown below.

When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.

Press preset 1 to activate the DISPLAY setting
mode. Press preset 1 again to select COLOR.

Press g or f to adjust the color between
MIN (-16) and MAX (+16) until you get your
desired color. When it reaches the minimum or
maximum point, the display shows “MIN” or
“MAX” respectively.

For any other settings, press preset 1 or another
preset button.

After setting is completed, press MUTE/SETUP
to return to normal mode.

NOTE
The Color setting for the video sources (AUX/DVD/NAV.)
will be individually memorized.

Tint adjustment can be made only to video
sources (DVD, Navigation system, etc).
Tint adjustment cannot be made if a Navigation
system with the RGB feature is connected.

After carrying out steps 1 to 3 of "To display the
SETUP screen" (page 29), perform the operation
shown below.

When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.

Press preset 1 to activate the DISPLAY setting
mode. Press preset 1 again to select TINT.

Press g or f to adjust the Tint (between –
16 and +16). When it reaches the minimum or
maximum point, display shows "R MAX" or "G
MAX" respectively.

For any other settings, press preset 1 or another
preset button.

After setting is completed, press MUTE/SETUP
to return to normal mode.

NOTE
The TINT setting for the video sources (AUX/DVD/NAV.)
will be individually memorized.

g

g

g

g

g

f

f

f

f

f