Alpine DVA-9861 Manual Do Proprietário

Página de 71
10
-EN
01GB05DVA9861.fm
ALPINE DVA-9861 68-04123Z61-A (EN)
This unit cannot receive HD Radio™ signals (digital terrestrial radio). 
In order to activate the digital radio functions described below, an 
optional HD Radio Tuner module must be connected through the Ai-
NET bus.
HD Radio™ Technology Manufactured Under License From iBiquity 
Digital Corporation. iBiquity Digital and the HD Radio and HD 
Symbols are trademarks of iBiquity Digital Corporation. U.S. and 
Foreign Patents.
Listening to Radio
1
Press SOURCE/POWER until a radio frequency 
appears in the display.
2
Press BAND repeatedly until the desired radio band 
is displayed.
F1 (FM1) 
 F2 (FM2) 
 AM 
 F1 (FM1)
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) 
 SEEK (Local mode) 
 
OFF (Manual mode) 
 DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in 
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic 
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press 
 or 
 to tune in the desired station.
Holding down 
 or 
 will change the frequency 
continuously.
• The “DIGITAL” indicator appears on the display when a digital 
radio station which contains both audio and text information, is 
received.
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio 
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the 
preset buttons (1 through 6) into which you wish 
to store the station.
The selected station is stored.
The display shows the band, preset number and station 
frequency memorized.
• A total of 18 stations can be stored in the preset memory (6 stations 
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station, 
the current station will be cleared and replaced with the new station.
Automatic Memory of Station Presets
1
Press BAND repeatedly until the desired radio band 
is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds. 
The frequency on the display continues to change while the 
automatic memory is in progress. The tuner will 
automatically seek and store 6 strong stations in the 
selected band. They will be stored into buttons 1 to 6 in 
order of signal strength.
When the automatic memory has been completed, the tuner 
goes to the station stored in preset location No. 1.
• If no stations are stored, the tuner will return to the original station 
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
Press BAND repeatedly until the desired band is 
displayed.
2
Press any one of the station preset buttons (1 
through 6) that has your desired radio station in 
memory. 
The display shows the band, preset number and frequency 
of the station selected.
Radio
SOURCE/
POWER
Rotary 
encoder
BAND
FUNC.
Preset buttons
(1 through 6)
TUNE/
A.ME
MODE
01GB00DVA9861.book  Page 10  Tuesday, December 6, 2005  3:41 PM