Alpine cda-9805 Guia Do Utilizador
14
-EN
Radio Operation
SOURCE/
POWER
POWER
BAND/TEL.
g
f
TUNE/A.ME
Preset buttons
(1 through 6)
(1 through 6)
Changing the Radio Frequencies for
each Country
each Country
For customers not living in North America, change the
radio frequencies as follows.
radio frequencies as follows.
1
Press and hold the F/SETUP button for at least 3
seconds.
seconds.
2
Select the "AREA" mode by pressing the g or f
button.
button.
3
Choose either AREA 1 or AREA 2 by pressing the
BAND/TEL. button.
AREA 1: Radio frequencies for North America
AREA 2: Other Radio frequencies
AREA 2: Other Radio frequencies
NOTE
The stored radio stations will be cleared every time you change
the setting.
the setting.
Manual Tuning
1
Press the SOURCE/POWER button until a radio
frequency appears in the display.
frequency appears in the display.
2
Press the BAND/TEL. button repeatedly until the
desired radio band is displayed.
desired radio band is displayed.
Each press changes the band:
3
Press the TUNE/A.ME button to select the tuning
mode.
mode.
(Only portions underlined on the display may be lit.)
Distance mode:
Both strong and week stations will be automatically tuned
in (Automatic seek tuning).
in (Automatic seek tuning).
Local mode:
Only strong stations will be automatically tuned in
(Automatic seek tuning).
(Automatic seek tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
→ FM1 → FM2 → AM
4
Press the g or f button to move downward or
upward one step respectively until the desired station
frequency is displayed.
upward one step respectively until the desired station
frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo FM
station is tuned in.
station is tuned in.
Automatic Seek Tuning
1
Press the BAND/TEL. button repeatedly until the
desired radio band is displayed.
desired radio band is displayed.
2
Press the TUNE/A.ME button to select the tuning
mode.
mode.
3
Press the g or f button to automatically seek for
a station downward or upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next station.
a station downward or upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next station.
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
station you wish to store in the preset memory.
2
Press and hold any one of the Preset buttons
(1 through 6) that you want to store the station on for
at least 2 seconds. The selected station is stored.
The display shows the band, preset No. and station
frequency memorized.
(1 through 6) that you want to store the station on for
at least 2 seconds. The selected station is stored.
The display shows the band, preset No. and station
frequency memorized.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 18 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2 and AM).
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 18 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2 and AM).
NOTE
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
station, the current station will be cleared and replaced with the
new station.
F/SETUP
SEARCH
Rotary encoder
→ DX SEEK
→ DX SEEK
→ DX SEEK
(Distance mode) (Local mode)
(Manual mode)