Alpine cda-7878 Guia Do Utilizador
11
-EN
Demonstration
This unit has a Demonstration feature which
simulates the display functions.
simulates the display functions.
1
Press and hold the SETUP button for at least 2
seconds.
seconds.
2
Press the f UP button to select the DEMO
mode. Each press changes the modes as shown:
mode. Each press changes the modes as shown:
∗ Displayed when you set SUB-W to ON.
NOTE
If you press the g DN button, the display scrolls in
reverse sequence.
If you press the g DN button, the display scrolls in
reverse sequence.
3
Press the TUNE button to turn on or off the
DEMO mode.
Each press toggles between DEMO ON and
DEMO OFF.
DEMO mode.
Each press toggles between DEMO ON and
DEMO OFF.
If no button is pressed for 30 seconds, the
DEMO mode activates.
DEMO mode activates.
NOTES
• The initial setting at the factory is “DEMO OFF.”
• To quit DEMO mode, set to “DEMO OFF.”
4
Press the SETUP button again to return to
normal operation.
normal operation.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an
optional Ai-NET/RCA Interface cable (KCA-121B)
or Versatile Link Terminal (KCA-410C) to this
component.
optional Ai-NET/RCA Interface cable (KCA-121B)
or Versatile Link Terminal (KCA-410C) to this
component.
1
Press and hold the SETUP button for at least 2
seconds.
seconds.
2
Press the f UP button repeatedly to select
“AUX.”
Each press of the f UP button changes the
modes as shown:
“AUX.”
Each press of the f UP button changes the
modes as shown:
∗ Displayed when you set SUB-W to ON.
∗∗ Displayed when you set AUX IN to ON.
NOTE
If you press the g DN button, the display scrolls in
reverse sequence.
If you press the g DN button, the display scrolls in
reverse sequence.
3
Press the TUNE button to toggle the mode
between AUX IN ON and AUX IN OFF.
between AUX IN ON and AUX IN OFF.
NOTES
• The initial setting at the factory is AUX IN OFF.
• You can set the AUX mode display by pressing the
g DN or f UP button after AUX IN ON is set,
select the AUX mode display setting, and then press
the TUNE button.
select the AUX mode display setting, and then press
the TUNE button.
• When connecting the KCA-410C, you can set two AUX
mode displays.
4
Press the SETUP button to return to normal
mode.
mode.
5
To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
SOURCE button and select the AUX mode, then
make the necessary adjustment.
NOTE
When using the Versatile Link Terminal (KCA-410C), you
can connect two external inputs. To select the mode,
press the BAND button on the unit.
When using the Versatile Link Terminal (KCA-410C), you
can connect two external inputs. To select the mode,
press the BAND button on the unit.
TUNER
SUB-W
SUB-W (switching phase)
∗
SUB-W STEREO/MONO
∗
AUX
(AUX Mode Display Setting
∗∗)
MUTE
SCROLL
BEEP
CONTRAST
DISC/FOLDER
DEMO
SRC DHE
TUNER
SUB-W
SUB-W (switching phase)
∗
SUB-W STEREO/MONO
∗
AUX
MUTE
SCROLL
BEEP
CONTRAST
DISC/FOLDER
DEMO
SRC DHE