Alpine cda-7878 Guia Do Utilizador
4
-EN
Basic Operation
POWER
MODE/Audio Control
RESET
MUTE
ANGLE
8
9
9
Detaching the Front Panel
1
Press and hold the POWER button for at least 2
seconds to turn off the power.
seconds to turn off the power.
2
Press the
(Release) button at upper left side
until the front panel pops out.
3
Grasp the left side of the front panel and pull it
out.
out.
NOTES
• The front panel may become hot in normal usage
(especially the connector terminals on the back of the
front panel.) This is not a malfunction.
front panel.) This is not a malfunction.
• To protect the front panel, place it in the supplied
carrying case.
2
1
1
Attaching the Front Panel
1
First, insert the right side of the front panel into
the main unit. Align the groove on the front panel
with the projections on the main unit.
the main unit. Align the groove on the front panel
with the projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
firmly into the main unit.
NOTE
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no foreign
object between the front panel and the main unit.
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no foreign
object between the front panel and the main unit.
Initial System Start-Up
Immediately after installing or applying power to the
unit, it should be initialized. Press the RESET switch
with a ballpoint pen or any other pointed object.
unit, it should be initialized. Press the RESET switch
with a ballpoint pen or any other pointed object.