Alpine CDA-9856 Manual Do Proprietário
25
-EN
01GB05CDA9856.fm
ALPINE CDA-9856 68-04123Z46-A (EN)
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400C (Multi-Changer Switching device) or the
KCA-410C (Versatile Link Terminal) multiple changers can be
controlled by this unit.
See “Multi-Changer Selection” on page 25 for selecting the CD
Changers.
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400C (Multi-Changer Switching device) or the
KCA-410C (Versatile Link Terminal) multiple changers can be
controlled by this unit.
See “Multi-Changer Selection” on page 25 for selecting the CD
Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press SOURCE/POWER to activate the CHANGER
mode.
mode.
The display shows the disc number and track number.
• The source indicator varies depending on the connected source.
• Press BAND to switch the Disc mode in the Changer mode.
• Press BAND to switch the Disc mode in the Changer mode.
2
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and CD
playback starts.
playback starts.
• After selecting the desired disc, you can operate in the same way as
for the CD player of this unit.
For details, please see the CD/MP3/WMA section.
For details, please see the CD/MP3/WMA section.
• If the “
” indicator is illuminated, the disc select buttons
become nonfunctional.
When a 12-disc CD Changer is connected:
Playing MP3 Files with the CD Changer
(Optional)
(Optional)
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Press SOURCE/POWER to switch to the MP3
Changer mode.
Changer mode.
2
Press any one of the disc select buttons (1
through 6) corresponding to one of the discs
loaded in the CD Changer.
through 6) corresponding to one of the discs
loaded in the CD Changer.
3
To pause playback, press
/
.
Pressing
/
again will resume playback.
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer, refer to
• For operating MP3 with an MP3 compatible CD Changer, refer to
“CD/MP3/WMA” pages 9 to 12.
Multi-Changer Selection (Optional)
Alpine's Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you can
connect up to 4 CD Changers. If you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you can
connect up to 4 CD Changers. If you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1
Press SOURCE/POWER on this unit to activate the
CD Changer mode.
CD Changer mode.
2
Press BAND to activate the CD Changer Selection
mode.
mode.
The CD Changer Selection mode remains active for several
seconds.
seconds.
3
Press BAND until the desired CD Changer indicator
appears on the display.
appears on the display.
• If the selected CD Changer is not connected, the display will show
“NO CHGR-No.”
• To operate the selected changer, see “CD/MP3/WMA” (pages 9 to
12).
• For further details about the external input (AUX) when using KCA-
410C, see “Setting the AUX Mode (V-Link)” on page 18.
Changer
(Optional)
(Optional)
To select discs numbered from 1 to 6, the procedure is the same as
for the 6-disc CD Changer. To select discs numbered from 7 to 12,
first press FUNC. to choose the disc select mode (7 to 12). This
changes the “D” indicator to “d”. Then press the desired select
button. The select buttons 1 to 6 will represent discs 7 to 12
respectively.
for the 6-disc CD Changer. To select discs numbered from 7 to 12,
first press FUNC. to choose the disc select mode (7 to 12). This
changes the “D” indicator to “d”. Then press the desired select
button. The select buttons 1 to 6 will represent discs 7 to 12
respectively.
SOURCE/POWER
BAND
FUNC.
Select buttons
(1 through 6)
(1 through 6)
/
01GB00CDA9856.book Page 25 Thursday, October 20, 2005 4:33 PM