Alpine IDA-X200 Guia Do Utilizador
26
-EN
• The SAT Receiver controls on this unit are operative only when a SAT
Receiver is connected.
1
Press
SOURCE to activate the SAT Radio mode.
2
Press BAND to select one of the three SAT Radio
Preset Bands.
Preset Bands.
Each press changes the band:
XM mode:
XM1
XM1
XM2
XM3
XM1
SIRIUS mode:
SR1
SR1
SR2
SR3
SR1
3
Press
or
to select the desired channel.
Holding down
or
will change channels
continuously.
• When using the optional remote control (RUE-4190, etc.), an SAT
Radio Channel can be directly called up with the numeric keypad of
the remote control.
the remote control.
1 While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
the remote control.
2 Press ENTER on the remote control within 5 seconds to
receive the channel.
If the channel number is input without pressing ENTER,
the channel is automatically received after
the channel is automatically received after
5 seconds.
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this number.
programming. Each third party XM or SIRIUS radio comes with this number.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of this unit in the following way.
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of this unit in the following way.
XM:
1
While receiving a XM Radio band, press
or
to select channel “0” for XM.
2
To cancel the ID number display, select the channel
other than “0.”
other than “0.”
SIRIUS:
1
While receiving a SIRIUS Radio band, press
or
to select channel “255” for SIRIUS.
2
To cancel the ID number display, set the channel to
other than “255”.
other than “255”.
• You cannot use “O,” “S,” “I,” or “F” for the ID Number (XM radio
Receiver only).
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
Storing Channel Presets
1
Press BAND to select the desired band you want to
store.
store.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
preset number.
or Rotary encoder (iDA-X300 only) to select the
preset number.
4
Press and hold
/ENTER for at least 2 seconds.
The selected station is stored.
5
Repeat the procedure to store up to 5 other channels
onto the same band.
onto the same band.
• To use this procedure for other bands, simply select the band desired
and repeat the procedure.
• A total of 18 channels can be stored in the preset memory for either
XM or SIRIUS. 6 Channels are stored in each band (XM1, XM2 and
XM3 for XM; SIRIUS1, SIRIUS2 and SIRIUS3 for SIRIUS).
XM3 for XM; SIRIUS1, SIRIUS2 and SIRIUS3 for SIRIUS).
• If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
new one.
Receiving Stored Channels
1
Press BAND to select the desired band.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select a
radio station.
or Rotary encoder (iDA-X300 only) to select a
radio station.
4
Press
/ENTER.
Storing the desired Sports Team (SIRIUS only)
Store a favorite team from one of the available leagues SIRIUS covers.
Once stored, game times and scores for that team are announced using
the interruption Alert display while receiving other programming. To
receive these announcements, refer to page 27.
This function becomes effective after performing the following two
operations.
Once stored, game times and scores for that team are announced using
the interruption Alert display while receiving other programming. To
receive these announcements, refer to page 27.
This function becomes effective after performing the following two
operations.
1
Select the channel broadcasting your favorite team’s
game.
game.
2
Press FUNC./SETUP to activate the Function
mode.
mode.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select
MEMORY, then press
or Rotary encoder (iDA-X300 only) to select
MEMORY, then press
/ENTER to activate the
Memory mode.
Storing while receiving a game broadcast