Hitachi DZ-MV780A Manual Do Proprietário

English

Card full.

Delete unnecessary stills and try the card, or use another card.

29, 110

No more recording on this card can be done: Delete unnecessary 
stills or use another card.

Card full.
Cannot execute.

Delete unnecessary stills and try the card, or use another card.

29, 110

Card is not formatted.
Format the card now?

Was the card formatted on PC? When using the card on this DVD 
video camera/recorder, choose “YES” and format it.

132

CHECK DISC

A disc unusable on this DVD video camera/recorder may have 
been inserted or the disc may be damaged.
Make sure that the type of disc is correct, and make sure that the 
disc is not write-protected.

25, 133

Control Information 
Error.

Mismatch may occur between the recorded image and scene 
information.
Update the control information.

134

• Use another disc.
• See *3 on page 166.

24, 26

COPY PROTECTED

The video signal input to this DVD video camera/recorder may be 
copy-guarded.
Some prerecorded video materials, such as movies, are guarded 
against copying.
Copy-guarded materials cannot be recorded on this DVD video 
camera/recorder.

80

DISC ACCESS

The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the 
DVD video camera/recorder.

49, 51

This DVD video camera/recorder is verifying whether the correct 
disc has been inserted.
Wait until the message disappears, and you can start to use the 
DVD video camera/recorder.

158

DISC ALMOST FULL

Remaining free space on disc is less than 1 minute of video or 10 
photos: Delete unnecessary scenes or use another disc.

28, 110

Disc error has occurred. 
Finalizing is not 
complete.

• Disc error occurred during finalizing, and finalizing failed. 

Replace the disc.

• See *3 on page 166.

135

Disc error has occurred. 
Format the disc now?

• Has the disc been initialized on PC? Has initializing the disc on 

PC been interrupted?
Choose “YES” and initialize the disc when using it on this DVD 
video camera/recorder. Initializing the disc will erase all data on 
it.

• See *2 on page 166.

132

Disc error has occurred. 
Formatting is not 
complete.

The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before 
reusing it, or use another disc.
This message may also appear if you insert a disc for which 
formatting was interrupted midway. In this case, use another disc.

26, 132

Disc error has occurred. 
Keep disc inside & 
restart.

Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc being used 
in it, connect AC adapter/charger, and then power the DVD video 
camera/recorder again. Repair of scenes will be tried.

43