Alpine DVE-5207 Guia Do Utilizador

Connections

White/Brown

REMOTE IN

GND

Black

BATTERY

Fuse

(7.5A)

Yellow

IGNITION

Red

Yellow

White (L)

Red (R)

White/
Brown

Black

Yellow

Red

• Video Output Connector

This connector is used in combination with the video inputs
of another video product (AV head unit or TV monitor).

• Audio Output Connectors

These connectors are used in combination with a head unit
or TV monitor with audio input connectors, if the digital
output terminal is not connected.

• Remote Control Input Lead

This lead is used in combination with an ALPINE monitor
with a remote control output lead.

• Ground Lead

Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.

• Battery Lead

Connect this lead to the positive (+) post of the vehicle’s battery.

• Switched Power Lead (Ignition)

Connect this lead to an open terminal on the vehicle’s fuse box
or another unused power source which provides (+) 12V only
when the ignition is turned on or in the accessory position.

• Digital Output Terminal (Optical)

This terminal is used to connect DVE-5207 to ALPINE
digital audio processor (PXA-H701 etc.).
These products include a fiber optic cable that will plug
directly into the digital output terminal of the DVE-5207.

• Remote Control Eye Jack

Connect the remote control eye to this jack. Not used when
using a monitor with a built-in remote control sensor unit. A
remote control eye is needed when a monitor made by
other company is connected.