Calculated Industries Construction Master Pro Guia Do Utilizador

To Change Desired Riser Height: If you wish to use a Desired
Riser Height of other than 7-1/2 Inches (the calculator’s default),
simply enter a new value. For example, to enter 8 Inches, enter 

8 i ß 7

. Press 

® 7

to review your new entry. This value

will be permanently stored until you change it.

To Change Desired Tread Width: If you wish to use a Desired
Tread Width of other than 10 Inches (the calculator’s default), simply
enter a new value. For example, to enter 10-1/2 Inches, enter 

1 0 i 1 / 2 ß 9

. Press 

® 9

to review your new entry.

This value will be permanently stored until you change it.

To Change Desired Floor Thickness: If you wish to use a Desired
Floor Thickness of other than 10 Inches (the calculator’s default),
simply enter a new value. For example, to enter 12 Inches, enter 

1 2 i ß 8

. Press 

® 8

to review your new entry. This

value will be permanently stored until you change it.

To Change Desired Headroom: If you wish to use a Desired
Headroom other than 6 Feet 8 Inches (the calculator’s default), 
simply select a new value via the Preference Mode and use the 

+

or 

–

keys to increase/decrease by one inch. See examples below.

This value will be permanently stored until you change it.

1. Select Headroom via Preference Mode: 

o o

Ç ß ß ß ß

2. Decrease Headroom Height by 2 Inches: 

– –

3. Then increase Headroom Height by 4 Inches: 

+ + + +

4. Return Headroom Height to default of 6 Feet 8 Inches: 

– –