Canon 430 Manual Do Utilizador

• You are recommended to set the shooting mode to 

 and the 

exposure compensation setting to zero (±0) before setting a custom 
white balance. The correct white balance may not be obtained when 
the exposure setting is incorrect (image appears completely black 
or white).

• Shoot with the same settings as when reading the white balance 

data. If the settings differ, the optimal white balance may not be set. 
Especially the following should not be changed.
- Flash

Setting the flash to on or off is recommended. If the flash fires 
when reading the white balance data with the flash set to 

 or 

, make sure that you also use the flash when you shoot.

- ISO Speed

• It is also advisable to use the LCD monitor to compose the shot and 

to zoom to the telephoto end setting. Also, the digital zoom should 
be set to [Off].

• Since the white balance data cannot be read in 

 (Stitch Assist 

mode), preset the white balance in another shooting mode. 

• Aim the camera so that the white paper, 

cloth or gray card completely fills the 
frame on the LCD monitor or the entire 
viewfinder before pressing the SET
button. The camera reads the white 
balance data when you press the SET
button.

• You can shoot right after selecting an 

option. The menu displays again after the 
shot, allowing you to change the settings 
easily.

The display will return to the Shooting 
screen.