Canon iPF9400S Manual

 

Close the Top Cover.

Tape down printer covers to secure them, in the reverse order of tape removal during installation.

If the Output Stacker is installed, reverse the installation procedure to remove the Output Stacker.

Remove the Stand by reversing the installation procedure, when it was attached to the printer.

Disassemble and repackage the Stand by following the installation procedure (with six people lifting the printer)
in reverse.

Important

Do not use the procedure for rotated installation (installing by rotating the printer). This may damage the printer. For
details, see Setup Guide.

Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping
box.

Update the printer firmware to take advantage of new and improved printer functions.

Confirming the firmware version

 

On the Tab Selection screen of the Control Panel, press 

◀ or ▶ to se-

lect the Settings/Adj. tab (

).

Note

If the Tab Selection screen is not displayed, press the Menu button.

Press the OK button.
The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Printer Info, and then press the OK button.

Press ▲ or ▼ to select System Info, and then press the OK button.
The firmware version is displayed.

 

 

iPF9400S

                                                                                                                                                                                                      

Updating the Firmware

                                                                                                                                                                                                                                        

Maintenance and Consumables

Other Maintenance

879