Canon A710 IS Guia Do Utilizador

Selecting an AF Frame Manually
(when [FlexiZone] is selected)

Turn on the LCD monitor.

Press the 

 button several times until 

the AF frame turns green.

z Depending on the shooting mode, you can switch 

between the following setting options by pressing the 

 button.

Use the 

, 

, 

 or 

 button to move 

the AF frame to the desired position and 
press the 

 button.

z If you hold down the 

 button, the AF frame will 

return to the original position (center) (at the same 
time, the setting options will switch as shown in the 
above table).

Exposure compensation/AF frame

Shutter speed/Exposure compensation/AF frame

Aperture value/Exposure compensation/AF frame

Shutter speed/Aperture value/AF frame

z When [Spot AE Point] is selected as the light metering 

mode, you can use the selected AF frame as the Spot 
AE Point (p. 50).

z It cannot be selected while manual focus is being used 

(p. 47).

z The AF frame returns to the center when the camera’s 

power is turned off.