Canon F50 Guia De Referência

Making Copies

The machine has the following SPECIAL COPY features. These features allow you to create special copies
easily by selecting from menus.

– IMAGE REPEAT

: Repeating an image over the paper

– MIRROR IMAGE

: Creating a mirror image

– ENTIRE IMAGE

: Shrinking an image to fit onto the paper

These features are only available in Copy Mode.

• Please note that you cannot set the SPECIAL COPY features during copying.

• After the machine finishes copying, the current setting will remain. However, if you press Stop/Reset

or if no button is pressed for one minute, the machine will reset to the default setting.

Use IMAGE REPEAT to print multiple copies of an image on a single sheet. You can select the number of times
you want to repeat the original image.

■ Scanned Area of a Document

The scanned area of a document differs between documents placed on the platen glass and documents loaded into
the ADF.
• The examples below show the scanned areas when copying a document on the same size of paper repeated 2

×

2 times.

The scanned area of a document depends on the paper size to be printed on and the number of times which it is repeated. 
• The examples below show the scanned areas when copying a document placed on the platen glass onto the

same size of paper.

• The scanned area of a document also depends on the enlargement/reduction ratio. 

NOTE

2X2

SCANNED AREA

3X3

SCANNED AREA

Platen Glass (face down)

ADF (face up)

SCANNED AREA

SCANNED AREA

NOTE