Canon F50 Guia De Referência

The following messages are displayed in the LCD when the machine is performing a function or encounters an error.
This section describes the general messages and ones related to copy functions. For the messages related to fax
functions, 

→ Fax Guide.

C INK EMPTY

CARTRIDGE
JAMMED

CHECK PAPER
SIZE

CHECK PRINTER

CLEAR ADF
(F50 model only)

CLEAR PAPER JAM

COVER OPEN

K INK EMPTY

The Cyan Ink Tank in the Printhead
(Cartridge) is empty.

The holder cannot move. This is normally
due to a paper jam.

The size of the paper in the multi-purpose
tray and that specified in the PAPER
SIZE

setting are different.

There may be an obstruction that is not
allowing the holder mechanism to move.

The Printhead (Cartridge) may be
defective.

The waste ink tank (which holds the ink
used for printhead cleaning) may be full.

There is a paper jam in the ADF.

There is a paper jam.

You opened the scanning unit during an
operation. 

The Black Ink Tank in the Printhead
(Cartridge) is empty.

Replace the Ink Tank. (

→ p. 5-6)

Clear the paper jam or whatever is
obstructing the holder and then press
Resume. Do not attempt to move the
holder manually.

Load the correct paper size or change the
PAPER SIZE

setting. (

→ p. 4-2)

Check for any obstruction (paper clip,
small object, etc.). Check also for a paper
jam and clear the jam if necessary (

→ pp.

6-1, 6-2). Then press Resume and start
again.

Press Resume. Reinstall the Printhead
(Cartridge) (

→ Quick Start Guide) and

start again.

In either case, if the error does not clear,
try turning off the power. Wait several
minutes, then turn on again.

Contact the Canon Customer Care Center
to have the waste ink tank replaced
immediately.

Remove the document you are trying to
copy or send from the ADF and press
Resume (

→ p. 6-2). Then start again.

Clear the paper jam (

→ pp. 6-1, 6-2) and

reload paper in the multi-purpose tray.
Then press Resume.

Close the scanning unit.

Replace the Ink Tank. (

→ p. 5-6)