Canon F50 Guia De Referência

T

roubleshooting

❚ Envelopes do not feed correctly.

Envelopes may not be loaded correctly.
• Make sure the envelopes are loaded properly (

→ p. 3-5). Do not load more than 10 envelopes in the multi-

purpose tray.

• Perform roller cleaning. (

→ p. 5-3)

The envelopes you are using may not meet the requirements for the machine.
• Envelopes must be U.S. Commercial No. 10 or European DL envelopes. (

→ p. 3-1)

• For additional troubleshooting, 

→ MultiPASS Suite User’s Guide.

❚ The machine will not make a copy.

One or more Ink Tanks in the installed Printhead (Cartridge) may be empty.
• Check for an error message in the LCD (

→ p. 6-4) and replace if necessary. (→ p. 5-6)

The document may not have been loaded correctly.
• Remove the document, stack it if necessary, and place it on the platen glass or load it into the ADF correctly. 

(

→ p. 2-3)

• Make sure the feeder cover is closed.

The Printhead (Cartridge) or Ink Tanks may not be installed properly.
• Make sure the Printhead (Cartridge) and Ink Tanks are installed properly. (

→ Quick Start Guide)

• Be sure to remove the orange protective cap from the Printhead (Cartridge) before you install it. (

→ Quick

Start Guide)

The machine may not be operating properly.
• Print the nozzle check pattern. (

→ p. 5-8)

❚ MEMORY FULL appears in the LCD when making multiple copies. (F50 model only)

The document you are copying may have too much graphics.
• If multiple pages are being copied, separate the pages into smaller stacks. If not, make the desired number of

copies one at a time as needed.

The machine’s memory is full.
• Print or delete any documents stored in memory (

→ Fax Guide) to free up space in the machine’s memory,

then start again.

• For additional troubleshooting, 

→ Print Quality Problems.

NOTE

NOTE