Canon F50 Guia De Utilização

This feature allows you to scan a document once and send it to several destinations. You can send the document
to a maximum of 113 destinations using a combination of the following dialing methods:
• One-touch speed dialing: up to 12 destinations
• Coded speed dialing: up to 100 destinations
• Regular dialing (using the numeric buttons): one destination
You can enter the destinations in any order. (Be sure to press Set after your entry with the numeric buttons.)

• If you frequently send documents to the same group of destinations, you can group them and register

these numbers for group dialing. You can register up to 111 fax numbers with group dialing and send
the same document to these numbers at the press of one or three buttons. (

→ p. 3-7)

NOTE

Sending Faxes

1

Press Fax to set Fax Mode.

Ex:

2

Prepare the document and place it on the
platen glass or load it into the ADF.

Ex:
(Currently used memory)

(Standby to scan)
• If you use the platen glass, LCD displays standby

mode.

• For color sending, press Color/B&W to turn on

its light. (

→ p. 4-1)

• To adjust the resolution and contrast, 

→ p. 4-2.

3

Enter up to 113 fax numbers using any of
the following methods:

❚ One-touch speed dialing:

Press the desired one-touch speed dialing button(s).

Ex:

❚ Coded speed dialing:

Press Coded Dial, then use the numeric buttons to
enter the two-digit code. Repeat for other codes.

Ex:

❚ Regular dialing:

Use the numeric buttons to enter the fax number,
then press Set.

Ex:

• If you enter an incorrect destination, press

and hold F to delete it.

• You must enter the second fax number

within five seconds of entering the first
one. All subsequent fax numbers must be
entered within 10 seconds. If you wait
longer than these times, the machine
automatically begins scanning the
document for sending. If you prefer the
machine not to do this, disable the TIME
OUT

setting. (

→ p. 9-5)

• If you want to review the numbers you

entered, use F or E to scroll through the
numbers.

4

Press Start to begin scanning for sending,
or wait a few seconds for the machine to
begin scanning automatically.

• The machine will first send the document to the

one-touch speed dialing destinations, then the
coded speed dialing destinations, and finally to the
destination dialed using regular dialing.

• If you prefer the machine never to scan a

document automatically after a few seconds,
disable the TIME OUT setting. (

→ p. 9-5)

• To cancel sending, press Stop/Reset then 

T.

Sending to all destinations you specified in step 3
will be canceled (you cannot cancel only one
destination), and the machine will print a MULTI
TX/RX REPORT. (

→ p. 7-4)

NOTE

T E L =

9 0 5 7 9 5 1 1 1 1

T E L =

1

4 9

3 9

2 5

2 5

A

0 2

C a n o n

F R A N C E

T E L =

2

5 0 9 2 1

0 4

C a n o n

I T A L I A

D O C U M E N T   R E A D Y

M E M O R Y   U S E D

0 %

1 2 / 0 3 / 2 0 0 1

M O N

1 5 : 3 0

F a x T e l

S T A N D A R D