Canon f20 Instrução De Instalação
Remove the shipping material from the machine.
1
Place the machine on a flat surface.
2
Remove all shipping tapes from the exterior of the machine.
NOTE
• DO NOT remove the USB label A at this stage.
Connect the power cord.
NOTE
• Before turning on the power, make sure the document cover A is closed.
Attach the multi-purpose tray and load paper.
1
Insert the tabs on the bottom edge of the multi-purpose tray into the holes on
the machine as shown.
the machine as shown.
P L E A S E W AI T
P U T I N C AR TR ID GE
Co
1
Plug the power cord
into a socket.
into a socket.
2
When you connect the
machine, the Alarm light blinks,
and the messages below
should appear in the LCD.
machine, the Alarm light blinks,
and the messages below
should appear in the LCD.
3
If nothing appears
in the LCD, press
[ON/OFF] to turn
on the machine.
in the LCD, press
[ON/OFF] to turn
on the machine.
A
Approx. 30 seconds
NOTE
• Please note that the cartridge
(printhead and ink tanks) is
installed in steps 5 and 6.
installed in steps 5 and 6.
USB label A