Canon 100 Manual Do Utilizador

114

List of Messages

SET THE TIME ZONE, 
DATE AND TIME

You have not set the time zone, date and time. This message 
appears each time you turn the power on until you set the time 
zone, date and time.

26

CHANGE THE BATTERY 
PACK

Battery pack is exhausted. Replace or charge the battery pack.

16

THE TAPE IS SET FOR 
ERASURE PREVENTION

Cassette is protected. Replace the cassette or change the 
position of the protect switch.

118

REMOVE THE 
CASSETTE

Camcorder stopped operating to protect the tape. Unload and 
reload the cassette.

19

CHECK THE INPUT

DV cable is not connected, or the connected digital device is 
turned off.

90

CONDENSATION HAS 
BEEN DETECTED

Condensation has been detected in the camcorder.

113

CONDENSATION HAS 
BEEN DETECTED 
REMOVE THE 
CASSETTE

Condensation has been detected in the camcorder. Unload the 
cassette.

113

TAPE END

Tape reached the end. Rewind the tape or replace the cassette.

–

INCORRECT TAPE 
SPECIFICATION

You attempted to perform audio dubbing on a tape recorded in 
HDV standard.

–

INCORRECT TAPE 
SPECIFICATION 
PLAYBACK IS 
RESTRICTED

You attempted to play back a tape recorded in HDV standard.

–

INPUT SIGNAL NOT 
SUPPORTED

You attempted to input video signal in HD standard through the 
DV terminal.

-

CHECK THE CASSETTE 
[REC MODE]

You attempted to perform audio dubbing on a tape recorded in a 
mode other than the SP mode.

94

CHECK THE CASSETTE 
[AUDIO MODE]

You attempted to perform audio dubbing on a tape recorded in 16-
bit or 12-bit 4-channel sound.

94

CHECK THE CASSETTE 
[BLANK]

You attempted to perform audio dubbing on a tape with a blank 
section.

94

HEADS DIRTY, USE 
CLEANING CASSETTE

Video heads are dirty. Clean the video heads.

120

COPYRIGHT PROTECTED 
PLAYBACK IS RESTRICTED

You attempted to play back a copyright protected tape.

91

COPYRIGHT
PROTECTED DUBBING 
RESTRICTED

You attempted to dub a copyright protected tape. May also appear 
when an anomalous signal is received during analog line-in 
recording.

91

NO CARD

Memory card not is inserted into the camcorder.

20

NO IMAGES

No images are recorded on the memory card.

–

CARD ERROR

A memory card error occurred. The camcorder cannot record or 
play back the image.
The error may be temporary. If the message disappears after 4 
seconds “

” flashes red, turn the camcorder off, remove the 

card and reinsert the card. If “

” changes to green, you can 

continue recording/playback.

–