Canon 100 Manual Do Utilizador
29
B
a
sic Functions
Re
co
rd
co
rd
in
g
E
When powered by a battery pack, the camcorder shuts off to save power
(
68) if left without any operation for 5 minutes. Approximately 30
seconds before the camcorder shuts off the message “
AUTO POWER
OFF” will appear. If the camcorder shuts off, turn the
switch to
and back on again.
About the LCD and viewfinder screen: The screens are produced with
extremely high-precision manufacturing techniques, with more than
99.99% of the pixels operating to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as black or green dots. This has
no effect on the recorded image and does not constitute a malfunction.
99.99% of the pixels operating to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as black or green dots. This has
no effect on the recorded image and does not constitute a malfunction.
Screen Displays during Recording
Time Code
Indicates the recording time in hours,
minutes and seconds.
minutes and seconds.
Remaining tape
Indicates the remaining time of the tape
in minutes. “
in minutes. “
” moves during
recording. “
END” flashes when the
tape reaches the end.
• When the time left is less than 15
• When the time left is less than 15
seconds, the remaining tape time may
not appear.
not appear.
• Depending on the type of the tape, the
indication may not be displayed
correctly.
correctly.
Recording reminder
The camcorder counts from 1 to 10
seconds when you start recording. This
is helpful to avoid scenes that are too
short.
seconds when you start recording. This
is helpful to avoid scenes that are too
short.
When “
” flashes
“
” flashes in red when the lithium
button battery is not installed, or when it
needs replacing.
needs replacing.