Canon hf s11 Manual De Instruções

Video

Quick Start Function

When you close the LCD panel with the camcorder on, the camcorder
enters the standby mode. In standby mode the camcorder consumes
only about 1/3 the power used when recording, saving energy when
you are using a battery pack. Additionally, when you open the LCD
panel, the camcorder is ready to start recording in approximately
1 second*, allowing you to record the subject right away.

* The actual time required varies depending on the shooting conditions.

1 With the camcorder on and in a recording mode, close the LCD

panel.

A beep will sound and the green ON/OFF (CHG) indicator will change
to orange to indicate the camcorder entered standby mode.

2 When you wish to resume recording, open the LCD panel.

The ON/OFF (CHG) indicator turns back green and the camcorder is
ready to record.

IMPORTANT

• Do not disconnect the power source during standby mode (while the

ON/OFF (CHG) indicator is lit in orange).

NOTES

• The camcorder will not enter standby mode if the LCD panel is closed

while the ACCESS indicator is on or flashing or while a menu is being
displayed. The camcorder may also not enter standby mode if the LCD
panel is closed while the memory card slot cover is open or when the
battery charge is too low. Check that the ON/OFF (CHG) indicator
changes to orange.

• The camcorder will shut off if left in standby mode for 10 minutes,

regardless of the

[Power Saving Mode] setting. Press

turn on the camcorder.

• You can select the length of time until shut-off or turn off the Quick Start

function altogether with the

[Quick Start] setting.

• Changing the position of the camera mode dial while the camcorder is

in standby mode will reactivate the camcorder in the operating mode
selected.

Operating modes:

POWER