Canon 600 Manual Do Utilizador
121
Connecting to a PC
E
Transferring Memory Card Images to a
Computer (Direct Transfer)
Computer (Direct Transfer)
With the supplied USB cable and Digital Video Software, you can transfer images to the
computer by simply pressing the
computer by simply pressing the
(print/share) button.
Preparations
The first time you connect the camcorder to the computer, you need to install the software
and set the auto-launch setting. From the second time on, you only need to connect the
camcorder to the computer to transfer images.
and set the auto-launch setting. From the second time on, you only need to connect the
camcorder to the computer to transfer images.
1. Install the supplied Digital Video Software.
See Installing the Software in the Digital Video Software Instruction Manual.
2. Set the camcorder to PLAY(VCR)•
mode.
3. Connect the camcorder to the computer using the USB cable.
See Connecting the Camcorder to a Computer in the Digital Video Software
Instruction Manual.
Instruction Manual.
4. Set the auto-launch setting.
• See Starting CameraWindow in the Digital Video Software Instruction Manual.
• The direct transfer menu appears on the camcorder screen and the
• The direct transfer menu appears on the camcorder screen and the
button
lights up.
Do not disconnect the USB cable, open the memory card cover, remove the
memory card, change the position of the TAPE/CARD switch or turn off the
camcorder and computer while data is being transferred to the computer (while
the camcorder’s card access indicator is flashing). Doing so may damage the
memory card’s data.
camcorder and computer while data is being transferred to the computer (while
the camcorder’s card access indicator is flashing). Doing so may damage the
memory card’s data.
Operation may not work correctly depending on the software and the
specifications/settings of your computer.
The image files on your memory card and the image files saved on the hard
disk drive of your computer are valuable, original data files. If you wish to use
image files on your computer, make copies of them first, and use the copied file,
retaining the original.
image files on your computer, make copies of them first, and use the copied file,
retaining the original.
Make sure that camcorder and computer are not connected with a DV cable
before connecting the camcorder to the computer using the USB cable.
Otherwise, the computer may not operate properly.
Otherwise, the computer may not operate properly.
We recommend powering the camcorder from a household power source while
it is connected to the computer.
Refer also to the computer instruction manual.
Users of Windows XP and Mac OS X:
Users of Windows XP and Mac OS X:
Your camcorder is equipped with the standard Picture Transfer Protocol (PTP)
allowing you to download still images (JPEG only) by simply connecting the
camcorder to a computer via USB cable without installing the software from the
DIGITAL VIDEO SOLUTION DISK.
allowing you to download still images (JPEG only) by simply connecting the
camcorder to a computer via USB cable without installing the software from the
DIGITAL VIDEO SOLUTION DISK.