Canon 600 Manual Do Utilizador

130

SET THE TIME ZONE, 
DATE AND TIME

You have not set the time zone, date and time. This message 
appears each time you turn the power on until you set the time 
zone, date and time.

26

CHANGE THE BATTERY 
PACK

Battery pack is exhausted. Replace or charge the battery pack.

17

THE TAPE IS SET FOR 
ERASURE PREVENTION

Cassette is protected. Replace the cassette or change the 
position of the protect switch.

134

REMOVE THE 
CASSETTE

Camcorder stopped operating to protect the tape. Unload and 
reload the cassette.

20

CHECK THE INPUT

DV cable or USB cable is not connected, or the connected digital 
device is turned off.

100
119

CONDENSATION HAS 
BEEN DETECTED

Condensation has been detected in the camcorder.

129

CONDENSATION HAS 
BEEN DETECTED 
REMOVE THE 
CASSETTE

Condensation has been detected in the camcorder. Unload the 
cassette.

129

TAPE END

Tape reached the end. Rewind the tape or replace the cassette.

–

CHECK THE CASSETTE 
[WRONG FORMAT]

You attempted to perform audio dubbing on a tape recorded in 
HDV format.

–

WRONG FORMAT 
PLAYBACK NOT 
POSSIBLE

You attempted to play back a tape recorded in HDV format.

–

CHECK THE CASSETTE 
[REC MODE]

You attempted to perform audio dubbing on a tape recorded in a 
mode other than the SP mode.

104

CHECK THE CASSETTE 
[AUDIO MODE]

You attempted to perform audio dubbing on a tape recorded in 16-
bit or 12-bit 4-channel sound.

104

CHECK THE CASSETTE 
[BLANK]

You attempted to perform audio dubbing on a tape with a blank 
section.

104

HEADS DIRTY, USE 
CLEANING CASSETTE

Video heads are dirty. Clean the video heads.

137

COPYRIGHT PROTECTED 
PLAYBACK IS RESTRICTED

You attempted to play back a copyright protected tape.

101

COPYRIGHT
PROTECTED DUBBING 
RESTRICTED

You attempted to dub a copyright protected tape. May also appear 
when an anomalous signal is received during analog line-in 
recording.

101

NO CARD

Memory card not is inserted into the camcorder.

21

THE CARD IS SET FOR 
ERASURE PREVENTION

SD Memory Card is set for erasure prevention. Replace the card 
or change the position of the protect switch.

21

NO IMAGES

No images are recorded on the memory card.

–

CARD ERROR

A memory card error occurred. The camcorder cannot record or 
play back the image.
The error may be temporary. If the message disappears after 4 
seconds an “

” flashes red, turn the camcorder off, remove the 

card and reinsert the card. If “

” changes to green, you can 

continue recording/playback.

–