Canon HV30 Manual De Instruções

 Recording

become distorted or it may not be recorded at 
the actual levels. This is not a malfunction.

 About the Power Save mode: To save power 

when the camcorder is powered by a battery 
pack, the camcorder will automatically shut off if 
left without any operations for 5 minutes 
(

44). To restore the power, turn the 

camcorder off and then on again.

 About the LCD and viewfinder screen: The 

screens are produced using extremely high-
precision manufacturing techniques, with more 
than 99.99% of the pixels operating to 
specification. Less than 0.01% of the pixels 
may occasionally misfire or appear as black, 
red, blue or green dots. This has no effect on 
the recorded image and does not constitute a 
malfunction.

 When using a tripod: Do not 

leave the viewfinder exposed to 
direct sunlight as it may melt 
(due to concentration of the light 
by the lens). Do not use tripods 
with fastening screws longer 
than 5.5 mm (0.2 in.). Doing so 
may damage the camcorder.

 When recording movies, try to get a calm, stable 

picture.
Excessive camcorder movement while shooting 
and extensive use of fast zooms and panning 
can result in jittery scenes. In extreme cases, 
the playback of such scenes may result in 
visually induced motion sickness. If you 
experience such a reaction, immediately stop 
the playback and take a rest break as 
necessary.

Recording Still Images

/

• Once the focus is automatically 
adjusted, 

 will turn green and one or 

more AF frames will appear.
• When you press 

 on the 

wireless controller, the still image is 
recorded immediately.

The CARD access indicator will flash 
as the image is being recorded.

Before using a memory card for the first 
time, be sure to initialize it with this 
camcorder (

66).

(

10)

PHOTO

PHOTO

PHOTO

CO

PY