Canon HV30 Manual De Instruções
Playback
Bas
ic
F
unc
tions
33
Viewing Still Images
1
Holding the lock button pressed
down, set the
down, set the
switch to
PLAY.
2
Move the
/
switch to
(memory card).
3
Select (
) the still image.
You can use the joystick to move
through the still images even if the
joystick guide above does not appear
on the screen.
through the still images even if the
joystick guide above does not appear
on the screen.
IMPORTANT
Observe the following precautions while the
card access display
appears on screen,
and when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
/
switch or the operating mode.
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Image Jump
You can jump ahead to a specific image
without having to browse all images one
by one.
without having to browse all images one
by one.
T
O RUN THROUGH THE STILL IMAGES
Push the joystick (
) or (
) and hold
it pressed down.
Release the joystick when the running
number gets to the number of the image
you want to display.
Release the joystick when the running
number gets to the number of the image
you want to display.
(
10)
CO
PY