Canon s530d Guia Do Utilizador

Starting the Memory Card Startup Utility

64

Using the Memory Card Startup Utility (Windows)

Use and set the Memory Card Startup Utility to change the settings when you insert a 
memory card or to change the mode of the card slot.
Normally, the Memory Card Startup Utility starts automatically when you insert a memory 
card. To start the Memory Card Startup Utility manually, follow the procedure described 
below.

➤

• Always use the Memory Card Startup Utility to eject a memory card. If 

you eject a memory card while the indicator lamp is on or blinking, the 
memory card may not operate properly.

• When you select Change the drive’s read/write attribute and set the 

Read/Write mode, note the following points:
- Change the write protection (switch or seal to prevent accidental 

erasing) of the memory card to write-enabled mode before inserting the 
memory card. If you insert a write-protected card, the computer may not 
operate normally.

- If you change the contents of a memory card, you must format the 

memory card with a digital camera, otherwise you may not be able to 
take photographs. This printer supports only the format used by the 
digital camera. Since this printer does not support the unique format of 
the computer, format it with the digital camera.

- If you change or manipulate the contents of a memory card from a 

computer, be sure to print the contents from the computer. If you print 
the contents from the operation panel, the information may not print 
properly.