Canon s530d Guia De Configuração Rápida
Printing Without a Computer
27
To use a memory card:
1.
Turn on the printer.
2.
Insert the PC card adapter into the card slot all the
way. The indicator lamp will light and the mark will
display. If ‘AT’ is displayed on the panel, it indicates
that images will be corrected automatically when
you’re printing data in formats supporting Exif 2.2
(Exif Print).
way. The indicator lamp will light and the mark will
display. If ‘AT’ is displayed on the panel, it indicates
that images will be corrected automatically when
you’re printing data in formats supporting Exif 2.2
(Exif Print).
3.
Insert the PC card adapter into the card slot all the
way. The indicator lamp will light.
way. The indicator lamp will light.
To eject the memory card:
1.
Make sure the indicator lamp is not blinking.
2.
Press the printer
POWER
POWER
button to turn
off the printer.
3.
Check that the indicator
lamp is off, and press
the Eject button.
lamp is off, and press
the Eject button.
4.
Pull out the PC card
adapter.
adapter.
The following procedure is different if you are using a memory
card when the printer is connected to the computer. See the
S530D User’s Guide on the Setup Software & User’s Guide CD-ROM.
card when the printer is connected to the computer. See the
S530D User’s Guide on the Setup Software & User’s Guide CD-ROM.
If you use your computer to modify content on the memory card,
make sure to print from the computer.
make sure to print from the computer.
If you remove the memory card or switch off the power to the
printer while the indicator lamp is blinking, the data of the
memory card may be destroyed.
printer while the indicator lamp is blinking, the data of the
memory card may be destroyed.
Indicator lamp
Eject button
POWER button
S530D QSG.book Page 27 Tuesday, May 7, 2002 4:14 PM