LXE mx3plus Guia De Referência

Página de 296
120 
Settings | Control Panel Options 
MX3Plus Reference Guide 
E-EQ-MX3PLUSRG-B 
Power 
Access: 
Start | Settings | Control Panel | Power 
Set Power Off, Backlight properties. Review battery status and perform backup battery 
charging/discharging. Adjust the settings and tap the OK box to save the changes. Changes are 
saved across tabs. Tap the “X” box to discard any changes. Tap the “?” for Help. The changes take 
effect immediately. 
Note: 
Control Panel parameters established in Power Properties affect the mobile device 
operating system.  
Factory Default Settings 
Battery 
Turbo Enabled 
Schemes – Battery Power 
User Idle 
3 seconds 
System Idle 
15 seconds 
Suspend 5 
minutes 
Schemes – AC Power 
User Idle 
2 minutes 
System Idle 
2 minutes 
Suspend 5 
minutes 
Please refer to Chapter 2 “Physical Description and Layout” section titled “Power Modes”. 
The mode timers are cumulative. The System Idle timer begins the countdown after the User Idle 
timer has expired and the Suspend timer begins the countdown after the System Idle timer has 
expired. When the User Idle timer is set to “Never”, the power scheme timers never place the 
device in User Idle, System Idle or Suspend modes (even when the device is idle). 
Because of the cumulative effect, and using the Battery Power Scheme Defaults listed above: 
•  The backlight turns off after 3 seconds of no activity, 
•  The display turns off after 18 seconds of no activity (15sec + 3sec),  
•  And the device enters Suspend after 5 minutes and 18 seconds of no activity. 
Battery 
The Battery tab shows the status and the percentage of power left in the main battery (removable). 
It also shows the status of the internal backup battery. The listed values cannot be changed by the 
user.