LXE mx3plus Guia Do Utilizador
Batteries
43
E-EQ-MX3PLUSOGWW-B
MX3Plus User’s Guide
Batteries
Note:
New batteries must be charged prior to use. If the main battery and backup battery are
depleted, the computer reverts to factory default values. RF configuration parameters
will need to re-entered when the depleted main battery is replaced. The backup battery is
eventually recharged by the main battery.
depleted, the computer reverts to factory default values. RF configuration parameters
will need to re-entered when the depleted main battery is replaced. The backup battery is
eventually recharged by the main battery.
The mobile device is designed to work with a Lithium-Ion (Li-ion) battery from LXE. Under
normal conditions it should last approximately eight to ten hours before requiring a recharge. The
more you use the scanner or the RF transmitter, the shorter the time required between battery
recharges. The operating system keeps date and time valid for a minimum of four days using a
fully charged backup battery and a main battery that has reached the Low Warning point.
normal conditions it should last approximately eight to ten hours before requiring a recharge. The
more you use the scanner or the RF transmitter, the shorter the time required between battery
recharges. The operating system keeps date and time valid for a minimum of four days using a
fully charged backup battery and a main battery that has reached the Low Warning point.
Main Battery
The main battery has a rugged plastic enclosure that is designed to withstand the ordinary rigors of
an industrial environment. Exercise care when transporting the main battery making sure it does
not come in contact with excessive heat or any power source other than an LXE MultiCharger or
the mobile device.
an industrial environment. Exercise care when transporting the main battery making sure it does
not come in contact with excessive heat or any power source other than an LXE MultiCharger or
the mobile device.
Backup Battery
The internal Nickel Cadmium (NiCd) backup battery provides power to the device for a short
amount of time when the main battery has been depleted, removed or has failed. The backup
battery requires no user intervention. Replacement is performed by LXE.
amount of time when the main battery has been depleted, removed or has failed. The backup
battery requires no user intervention. Replacement is performed by LXE.
Note: An uninterrupted external power source (wall AC adapters or DC/DC converters)
transfers power to the computer’s internal charging circuitry which, in turn, recharges
the main battery and backup battery. Frequent connection to an external power source is
recommended to maintain backup battery charge status.
the main battery and backup battery. Frequent connection to an external power source is
recommended to maintain backup battery charge status.
Battery Hot-Swapping
When the battery power level is low, the BATT-M LED illuminates and remains on. You can
replace the main battery without shutting the device off. Place the device in Suspend and simply
replace the discharged battery with a fully-charged battery. The backup battery will retain data
during a main battery hot-swap for at least five minutes.
replace the main battery without shutting the device off. Place the device in Suspend and simply
replace the discharged battery with a fully-charged battery. The backup battery will retain data
during a main battery hot-swap for at least five minutes.