LXE vx7 Guia Do Utilizador

80 

Display and Touchscreen 

VX7 User’s Guide 

E-EQ-VX7OGWW-H 

Although the touch screen is installed and calibrated at the factory, users may make adjustments to 
it.   To calibrate the touchscreen, select Start|Settings and double tap the Stylus icon. 

 

The calibration utility displays a cross on the screen.  Touch the center of the cross with the stylus 
and hold for a few seconds.  Release and repeat with the next cross.  After all locations have been 
touched, either press <Enter> or click the Calibration button. 

LXE offers a replaceable touchscreen protective film to protect the touchscreen when the VX7 is 
used in an abrasive environment.  Installation and removal instructions can be found earlier in this 
guide. 

Please refer to the “VX7 Reference Guide” for information on identifying your VX7. 

Because the touchscreen also functions as a mouse, the pointer for on the 95-key keyboard, a USB 
mouse or a PS/2 mouse may not always be visible on the screen.  The mouse pointer reappears 
when the 95-key keyboard pointer or external mouse is moved or clicked.  Please see “USB 
Mouse” earlier in this manual for more details. 

•  When a USB mouse is first attached to the VX7, the mouse pointer may not be 

visible.  However, moving or clicking the mouse causes the pointer to appear. 

•  When the USB mouse is unplugged, the pointer may remain visible until the 

touchscreen is tapped. 

•  If the touchscreen is used for input, the mouse pointer may disappear.  However, 

moving or clicking the mouse or pointing device on the 95-key keyboard causes the 
pointer to reappear. 

The mouse pointer is not visible unless a mouse (P/S2 or USB mouse or 95-key keyboard with 
pointing device) is attached. 

If a mouse of any kind is attached, the mouse pointer is displayed on screen.