LXE mx8 Guia Do Utilizador
40
Saving Changes to the Registry
MX8 User’s Guide
E-EQ-MX8OGWW-C
Reset to Default Settings
Important:-- Because of the extreme nature of resetting the MX8 to factory default
settings, LXE recommends that this process be used only as an emergency procedure
and the Warm Boot be used whenever necessary.
Two different resets are provided on the MX8. User registry settings can be reset to factory
defaults using ClearHive.exe or all settings, which includes registry and the persist keys in
Launch.reg, can be reset using Coldboot.exe.
defaults using ClearHive.exe or all settings, which includes registry and the persist keys in
Launch.reg, can be reset using Coldboot.exe.
Reset Registry
To reset the MX8 registry to factory defaults:
1. Tap Start | Run and, using the virtual keyboard or SIP, type CLEARHIVE. Tap the OK
button. This command is not case-sensitive.
2. A dialog appears, explaining the restore to default settings process. Select either Yes or
Cancel.
3. Selecting Yes causes the reset process to continue and factory default settings are restored
when the device powers on again. Selecting Cancel stops the reset process. All previous user
settings, authorizations and configurations, wireless connection settings, Bluetooth
relationship settings and Control Panel parameter settings are cleared.
settings, authorizations and configurations, wireless connection settings, Bluetooth
relationship settings and Control Panel parameter settings are cleared.
4. Programs begin installing and messages are shown on the display as each is installed. When
the CE Desktop appears or the final application opens, the reset is complete.
Calibrating the touchscreen will need to be performed during this process.
If needed, change the MX8 Time and Date from it’s factory default value by tapping the
|
Settings | Control Panel | Date/Time icon.
Reset All
To reset all MX8 configuration to factory defaults:
Tap Start | Run and, using the virtual keyboard or SIP, type RESETALL. Tap the OK button.
Because of the extreme nature of resetting the MX8 to factory default settings, two confirmation
prompts are displayed. To proceed with the reset, select ‘Yes’ to both prompts. The MX8 cold
boots after resetting the configuration. This command is not case-sensitive.
Because of the extreme nature of resetting the MX8 to factory default settings, two confirmation
prompts are displayed. To proceed with the reset, select ‘Yes’ to both prompts. The MX8 cold
boots after resetting the configuration. This command is not case-sensitive.
There may be small delays while the wireless client connects to the network, authorization for
Voxware-enabled applications complete, Wavelink Avalanche management of the MX8 startup
completes, and Bluetooth relationships establish or re-establish.
Voxware-enabled applications complete, Wavelink Avalanche management of the MX8 startup
completes, and Bluetooth relationships establish or re-establish.
Note: ResetAll.exe vs ClearHive.exe – The ClearHive.exe utility clears the registry and
coldboots the MX8. The ResetAll.exe utility clears the registry, resets the persist keys in
the Launch.reg file to factory defaults and coldboots the MX8.
the Launch.reg file to factory defaults and coldboots the MX8.
Saving Changes to the Registry
The MX8 saves the registry every time a Suspend function is initiated.
The registry is automatically saved every 10 seconds. It is also saved every tenth time the registry
settings are changed. Registry settings are changed when control panel property (e.g. Date/Time)
parameters are changed by the user and the OK button is tapped. The changes are not permanently
saved until one or both of the two conditions above are met (10 seconds elapsed or 10 registry
changes).
settings are changed. Registry settings are changed when control panel property (e.g. Date/Time)
parameters are changed by the user and the OK button is tapped. The changes are not permanently
saved until one or both of the two conditions above are met (10 seconds elapsed or 10 registry
changes).