LXE mx8 Guia De Referência
Summit Client Configuration
189
E-EQ-MX8RG-C
MX8 Reference Guide
Note:
More details are provided in the appropriate Summit Wireless Security section following
in this chapter. If invalid credentials are entered into the stored credentials, the
authentication will fail. No error message is displayed and the user is not prompted to
enter valid credentials.
in this chapter. If invalid credentials are entered into the stored credentials, the
authentication will fail. No error message is displayed and the user is not prompted to
enter valid credentials.
How to: Use Sign On Screen
1. After completing the other entries in the profile, tap the Credentials button. Leave the
Username and Password blank. No entries are necessary on the Credentials screen for
LEAP or WPA/LEAP.
LEAP or WPA/LEAP.
2. For PEAP-MSCHAP, PEAP-GTC and EAP-TLS import the CA certificate into the
Windows certificate store.
3. For EAP-TLS, also import the User Certificate into the Windows certificate store.
4. Access the Credentials screen again. Make sure the Validate server and Use MS store
4. Access the Credentials screen again. Make sure the Validate server and Use MS store
checkboxes are checked.
5. The default is to use the entire certificate store for the CA certificate. Alternatively, use
the Browse button next to the CA Cert (CA Certificate Filename) on the Credentials
screen to select an individual certificate.
screen to select an individual certificate.
6. For EAP-TLS, also enter the User Cert (User Certificate filename) on the credentials
screen by using the Browse button.
7. Tap the OK button then the Commit button.
8. When the device attempts to connect to the network, a sign-on screen is displayed.
9. Enter the Username and Password. Tap the OK button.
8. When the device attempts to connect to the network, a sign-on screen is displayed.
9. Enter the Username and Password. Tap the OK button.
Figure 5-9 Sign-On Screen
Verify the device is authenticated by reviewing the Status tab. When the device is properly
configured, the Status tab indicates the device is Authenticated and the method used.
configured, the Status tab indicates the device is Authenticated and the method used.
The sign-on screen is displayed after a reboot for each of the listed protocols.
Note: Complete details are provided in the appropriate Summit Wireless Security section
following in this chapter.
If a user enters invalid credentials and taps OK, the device associates but does not
authenticate. The user is again prompted to enter credentials.
authenticate. The user is again prompted to enter credentials.
If the user taps the Cancel button, the device does not associate. The user is not
prompted again for credentials until the device is rebooted, the radio is disabled then
enabled, the Reconnect button on the Diags tag is tapped or the profile is modified and
the Commit button is tapped.
prompted again for credentials until the device is rebooted, the radio is disabled then
enabled, the Reconnect button on the Diags tag is tapped or the profile is modified and
the Commit button is tapped.