Canon IP6600D Guia Do Utilizador
12
Loading the Print Media in the Auto Sheet Feeder
In this example, description is provided using Photo Paper Plus Glossy
4" x 6"/101.6 x 152.4 mm in your printer.
See “Media Types for Card Direct Printing” on page 16 for compatible paper.
4" x 6"/101.6 x 152.4 mm in your printer.
See “Media Types for Card Direct Printing” on page 16 for compatible paper.
1
Flatten the four corners of the paper before loading it.
2
Prepare to load the paper.
3
Load the paper.
If the paper is curled, gently bend the corners in the opposite direction
until the paper becomes completely flat. See “Back of Paper is Smudged/
Paper Does Not Feed Properly/Printed Surface is Scratched” on page 64.
until the paper becomes completely flat. See “Back of Paper is Smudged/
Paper Does Not Feed Properly/Printed Surface is Scratched” on page 64.
(1) 1. Open the paper support.
2. Pull out the paper support
extension to support the paper.
(2) 1. Put your fingers in the notches in either side of the paper output tray and pull down to
open it.
2. Pull out the paper out put tray extension completely.
(3) Press the Feed Switch
Feed Switch
Feed Switch
Feed Switch button so that
the auto sheet feeder lamp lights.
Auto sheet feeder lamp
1
1
1
1
2
2
2
2
1
1
1
1
2
2
2
2
(1) Load the paper into the auto sheet feeder
with the print side facing UP.
(2) Align the paper stack against the cover
guide on the right side of the paper
support.
support.
Ensure that the cover guide stands when
you load paper in the auto sheet feeder.
you load paper in the auto sheet feeder.
Load limit mark
Load limit mark
Load limit mark
Load limit mark
Do not load the stack of paper beyond this load limit
mark.
Do not load the stack of paper beyond this load limit
mark.
(3) Pinch the paper guide and slide it against the left side of the paper stack.
iP6600D_DPG_US.book Page 12 Friday, May 27, 2005 6:39 PM