Ricoh 3035 Guia De Utilização

Log Information and Deleting Data on the Hard Disk

37

C

D

Press [Auto Erase Memory Setting].
If the setting to be specified does not appear, press [

TNext] to scroll down to

other settings.

E

Press [On], and then select the method of erasing the data.
Select the method of erasing the data from [NSA], [DoD], or [Random Numbers].

When you select “Random Numbers”

A Press [Change].
B Enter the number of times that you want to overwrite using the number

F

Press [OK].
Auto Erase Memory is set.

❒ When Auto Erase Memory is set to "On", temporary data that remained on

the hard disk when Auto Erase Memory was "Off" might not be overwritten.

❒ Should the main power switch of the machine be turned off before over-

writing is completed, the temporary data will remain on the hard disk un-
til the main power switch is next turned on and overwriting is resumed.

❒ If the overwriting method is changed while overwriting is in progress, the

remainder of the temporary data will be overwritten using the method set
originally.

A

A

D

B

C

Press [OK].
Auto Erase Memory is disabled.

❒ To set Auto Erase Memory to "On" again, repeat the procedure in “Auto Erase

Memory Setting”.