Ricoh 2232c Guia Do Utilizador
Remarks
148
6
Replacing the Waste Toner Bottle
R WARNING:
R CAUTION:
If the message "
Waste Toner Bottle
Replacement.
", "
Waste Toner Bot-
tle is full.
", and "
Please re-
place Waste Toner Bottle.
" are
displayed, either replace it on your
own by following the procedure be-
low or call your service representa-
tive.
own by following the procedure be-
low or call your service representa-
tive.
Note
❒ Service differ depending on the
maintenance service contract.
AAAA
Turn off the power, and then un-
plug the power cable.
plug the power cable.
BBBB
Slowly open the front cover by
pulling down from the two areas
on the left and right.
pulling down from the two areas
on the left and right.
CCCC
Carefully pivot the waste oil bot-
tle outward, in the direction of the
arrow.
tle outward, in the direction of the
arrow.
R CAUTION:
• Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.
might ignite when exposed to
an open flame.
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating a “hot
surface”. Otherwise, an injury
might occur.
parts with a label indicating a “hot
surface”. Otherwise, an injury
might occur.
• Keep toner (used or unused) and
the toner cartridge out of reach of
children.
children.
• Keep the waste oil bottle away
from flames. There is a risk of fire
or burns.
or burns.
AA
AAE030S
ZHXH150J
0816JupiterC1GSG_GB_FM.book Page 148 Friday, August 29, 2003 7:56 PM