Ricoh 2232c Guia Do Utilizador
Preparing the Machine
11
2
❖
❖
❖
❖ IEEE 1394 (SCSI print) Connection
CCCC
Plug the other end of the cable
into the connector on the compu-
ter’s interface.
into the connector on the compu-
ter’s interface.
DDDD
Turn on the machine's main pow-
er switch.
er switch.
EEEE
Turn on the computer.
Note
❒ When using Windows 95/98/Me/
2000/XP and Windows Server
2003, a printer driver installa-
tion screen might appear when
the computer is turned on. If
this happens, click [Cancel] on
the screen. For more informa-
tion, see p.16 “Auto Run”.
2003, a printer driver installa-
tion screen might appear when
the computer is turned on. If
this happens, click [Cancel] on
the screen. For more informa-
tion, see p.16 “Auto Run”.
The machine and computer are
now connected. The printer driver
must be installed next. For infor-
mation about how to install the
printer driver, see p.16 “Installing
the Software”.
now connected. The printer driver
must be installed next. For infor-
mation about how to install the
printer driver, see p.16 “Installing
the Software”.
Connecting the machine to the host
using a USB cable
using a USB cable
You can connect the machine to the
host computer using a USB interface
cable when the optional USB 2.0 inter-
face board is installed in the machine.
This machine does not come with a
USB interface cable. Make sure you
purchase the appropriate cable for the
machine and your computer.
host computer using a USB interface
cable when the optional USB 2.0 inter-
face board is installed in the machine.
This machine does not come with a
USB interface cable. Make sure you
purchase the appropriate cable for the
machine and your computer.
Follow the procedure below to con-
nect the machine to the host computer
using a USB interface cable.
nect the machine to the host computer
using a USB interface cable.
AAAA
Connect the USB 2.0 interface ca-
ble to the USB port on the right
side of the machine's back cover.
ble to the USB port on the right
side of the machine's back cover.
BBBB
Connect the other end to the USB
port on the host computer.
port on the host computer.
Note
❒ The optional USB 2.0 interface
board is supported by Windows
98 SE/Me/2000/XP, Windows
Server 2003, Mac OS 9.x, and
Mac OS X Classic mode.
• For Windows 98 SE/Me:
98 SE/Me/2000/XP, Windows
Server 2003, Mac OS 9.x, and
Mac OS X Classic mode.
• For Windows 98 SE/Me:
Make sure to install “USB
Printing Support”. If USB 2.0
is used with Windows 98
SE/Me, only a speed equal to
that of USB 1.1 is possible.
Printing Support”. If USB 2.0
is used with Windows 98
SE/Me, only a speed equal to
that of USB 1.1 is possible.
• For Mac OS:
Mac OS supports only the
standard USB port. If USB 2.0
is used with a Mac OS, only a
speed equal to that of USB 1.1
is possible.
standard USB port. If USB 2.0
is used with a Mac OS, only a
speed equal to that of USB 1.1
is possible.
ZKRP10J
ZKRP20J
JupiterC1-GB-Pref1-11_FM.book Page 11 Thursday, September 4, 2003 2:02 PM