Ricoh c410dn Guia Do Programa

Making Printer Settings Using the Control Panel

154

❖ Memory Usage

You can select memory to be used from "Font Priority" or "Frame Priority".
• Font  Priority
• Frame Priority

❒ Default : Frame Priority

❖ B&W Page Detect

Specify whether to recognize black-and-white images. Use the black-and-
white recognition function to print all monochrome pages in monochrome
mode even if color printing is specified.
• Per  Page
• Per  Job

❒ Default: Per Page

❖ Spool Printing

You can select whether all of the print data is spooled to the hard disk drive
before printing.
• On
• Off

❒ Default: Off
❒ Spooling stores a sent print job temporarily in the printer, and then prints it.
❒ This menu appears only when the optional hard disk is installed.

❖ RAM Disk

If the optional hard disk is not installed for PDF Direct Print, select a value of
2 MB or higher.
This menu appears only when the optional hard disk is not installed.
• 0  MB
• 2  MB
• 4  MB
• 8  MB
• 16 MB

❒ Default: 4 MB

❒ When the amount of SDRAM is small and RAM Disk is set to 16 MB, print-

ing may not be possible depending on the print job and duplex printing
may be canceled. If this happens, increase the amount of SDRAM, or set
RAM Disk to 8 MB or less.

For details about the optional SDRAM module, see Hardware Guide.